|
Registered
Join Date: Jul 2001
Location: Suntree, Florida, USA
Posts: 2,261
|
SC Cams Fueling Requirement
Is it possible that having SC cams in the motor would require to run the CIS richer than specification?
The motor will not start and run at 2.2Bar cold control pressure. But when lowered to 1.5-1.7Bar it starts and runs just fine.
Everything else on the motor is stock except the SC cams and the K27 (which should not matter at idle speeds).
__________________
JB - BreitWerks
www.breitwerks.com
321-806-8664
Engine Rebuild & Restorations
|