View Single Post
harryrcb harryrcb is offline
Registered User
 
harryrcb's Avatar
 
Join Date: Sep 2010
Location: NPR, Florida
Posts: 494
Garage
[QUOTE=newlife;6309496]
Quote:
Originally Posted by harryrcb View Post
Sorry I got a little behind the eight ball, Thanks John for stepping in your experience with these is greater than mine. Scott yes they seem to be coming out of nowhere. Since this last one I did and with the results I found, two more people signed up for the change.



Hi Harry,

Good post btw !

Harry is there any noise that may come from the engine compartment early on that may be an early warning signal for this type of failure? Is it a quiet ticking noise while in the car? Or would it be more obvious while standing outside/underneath the car while the motor is running/at idle? And what about while going through the gears? Will we hear anything?

Thanks Harry !

Rod
the quiet ticking noise you hear are most likely your injectors, they are quite loud. by the time you hear the bearing it is most likely too late although some guys have posted that they heard a squealing sound before the engine went kapow. Sometime you can hear a rattling sound which is not the bearing but rather the cam chains from having too much slack. I guess the most important thing you can do is keep a vigal eye out for oil leaks, check your oil filters for debris and of cousre any unusual sounds or just bite the bullet and install a new bearing.
__________________
Crazy Austrian
http://www.ws-ab.com
Old 10-13-2011, 07:26 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #18 (permalink)