|
The problem is the stud nuts, they corrode with the heat and after a good soaking in rust penetrant they require the use of a smaller size spanner to start with 1/2" then 12mm if they are real rusty.
I found a lot of the studs came out rusted up with the nuts and thats ok cause the need the room anyway,not sure if you can pull the head with the exhaust on remembering my car is right hand drive,you may be ok.
Best of luck.
__________________
1985 944 2.7 motor,1989 VW Corrado 16v,57 project plastic speedster t4 power,1992 mk3 Golf,2005 a4 b7 qt avant 3.0 tdi,1987 mk2 Golf GTI,1973 914,2.2t to go in.
Past cars, 17 aircooled VW's and lots of BMW's
KP 13/3/1959-21/11/2014 RIP my best friend.
|