|
In the Fires of Hell.....
Join Date: Oct 2007
Location: Phoenix, AZ
Posts: 3,779
|
Each cradle is mated to an individual block, then align bored. Unless you get one that is really really close to what your block is, it will be very difficult to find a machine shop that will be able to align bore it and make it useable.
Keith
__________________
PCA Instructor: '88 951S - with LBE, Guru chips, 3Bar FPR, 1.3mm shimmed WG, 3120 lbs, 256 RWHP, 15 psig boost
|