The lock knob. I have already pried out the cover and removed the retaining screw.
The front screw that holds the top cover onto the door frame.
The rear mounting screw for the top cover. A plastic plug should cover the hole.
Next, we move on to the door pocket!
The front mounting screw goes into the plastic block you can see there.
There are three machine screws (most others in the door are sheet-metal screws!) that hold the bottom of the pocket onto the door. From front to rear, here is where they are:
The next screw (again, a sheet-metal type screw) goes into the back of the hinge for the cover.
The final one is inside the pocket itself, going into the bottom of the door handle part.
More in the next post.
--DD