Now we remove the hinged lid to the compartment. There are two screws on the back, and when those are removed, the lid pulls back out of the door handle part.
Next we remove the block on the front which we saw earlier.
Then remove the window switches. (Fortunately that stain is covered by the upper door panel.) Be careful, especially if you use a small screwdriver like this to pry them out.
Yes, that is the new tweeter on the left of the picture.
Now you disconnect the door pull rod from the flapper. This, BTW, is the improved metal flapper that we sell. We managed to break the original plastic part; the metal one should never break.
More next post!