|
Sorry forgot one thing. Also check the safety neutral switch at the transmission. they have a tendancey to melt the connector rendering it almost impossible to remove. If the connections
at the switch are burnt then it could lead to high resistance in the circuit causing a 10 amp fuse to blow but not enought to blow a 20 amp fuse. Unless I'm thinking of the older GMs but its worth the look. I have also had BCMs cause numerous issues seen as its used as a gateway for a lot of modules..ie IPC, Radio.Unless there is something that is causing the data line to fault but the radio/cd issue sounds like an internal radio fault and not a power fault, and the IPC is faulting because of the fuse being open.
Last edited by boosted 89; 12-03-2011 at 08:41 AM..
Reason: more
|