Car is OBD-1 (in other words, pre-OBDII).
Fuel pressure is measured at the rail - it is good.
None of the injectors fire - zero.
Really leaning toward the crank sensor. After seeing your posts, I did a search and found that the crank sensor sends a signal that phases the firing of the injectors. That search yielded a few test sequences to narrow the issue.
I would have thought a failure of that sensor would have also resulted in a failure of the ignition system (no trigger). Perhaps not... The part is $80 and at this point, I'm ready to just buy the part and have it put in. It works or it doesn't. Six months of buying insurance for a car that doesn't run and being without my own car is really starting to piss me off.
I'm going to bypass the alarm. It's had a glitch in it for a while. Disabling will take care of that.
angela