|
Hey guys, believe I have found the error of my ways! It isn't in yet but I took the day and did other things then took a more relaxed look at things. I'm actually glad it didn't go in because I made a rookie mistake.
- There are 3 pins that stick out of the flywheel, they have to fit into the pressure plate properly. This would not have been a problem probably until I started driving the car...but I'm so glad I found it and correct my mistake.
- I practiced putting a clutch on to the input shaft and notice it will completely not go on if the two are not meshed up perfectly. I also just learned what you said, have to turn both transaxles at the same time or I can just tweak a small turn from the drive shaft from inside the car. I'm sure as soon as they mess up it will slide right on.
I basically simulated all my theories that were wrong and thus learned.
One thing having survived cancer taught me...that adversity in life should always be treated like an adventure.
|