|
If You are getting a "blinking" temp light on the dash that could mean low
coolant in the system..
After a good run with the car, check the coolant level. Burp the coolant system.
Crack open the coolant fill cap slowly and let out the air. Make sure you have
the correct amount of coolant in the system. You might have to do this three or four times to get the air out.
Anything to the left of the middle graduation line between 180 and 250 and you
will not hurt your Porsche.
I don't know if taking it in for service has anything to do with the hight temp.
Check your front radiators and make sure you have no obstructions.
In my opinion if the temp is reading at the line between 180 and 250...
you need to get it diagnosed and fixed.
200 degrees is ok but running your 996 at 210 is a little to high in my opinion.
|