[MPDano]

Ok, started my TT Rebuild today. I am following a Dwayne write up with subtle changes in my procedures. I bought a 6 foot piece of threaded 5/8" Rod. Went to Home Depot and got the nuts, washers. Cut up a small piece of 2x4 and used a small can to mark my circle and used a Jig Saw to make the cut. I put some bearing grease on the rod as well as the edges of the wood just in case it decided to rub the TT sides.

The 2-1/8" measurement was how far the Shaft end was to the Tube end.

Day 1