[not_hans_stuck]

So, the motor and the tranny are hopelessly stuck together. I can't get more than 1/8" gap between them.

I took out the starter and the four bolts - including the starter. I see nothing else holding it.

I used a porta-power for some additional leverage and it wouldn't budge. I also took out the one long stud that the starter motor uses just because I could.

It wiggles back and forth a little but it doesn't split.

I drove the car last weekend so the pilot shaft isn't frozen to the flywheel.

I soaked it in PB Blaster.

Any other ideas?