|
Registered
Join Date: Dec 2002
Location: Dahlonega , Georgia
Posts: 15,022
|
You might want to make an outline with tape of where the rubber side mounts are currently located. The biggest problem I had was getting the tank " seated " properly both side to side and depth wise. First time I tried to close the hood it hit the top of the evap. tank ! Had to lift the tank, lower the rubber mounts and lower the tank. Did this 2-3 times before I had it the way I wanted it. Also use new gaskets on the fuel nipples on the bottom of the tank and a new fuel sock filter. Do it all the first time you don't want to be pulling the tank out again.
__________________
2002 Boxster S . Arctic silver + black top/int. Jake Raby 3.6 SS engine " the beast ". GT3 front bumper, GT3 side skirts and GT3 TEK rear diffuser. 1999 996 C4 coupe black/grey with FSI 3.8 engine . Rear diffuser , front spoiler lip with ducktail spoiler .
|