[Wrentham636]

Looking for suggestions here. I'm trying to remove the passenger side seat. Let me say now that i'm replacing both seats so the destruction of this seat to remove it is on the table.

The rail on one side will not move in either direction and of course, mounting screws at all four corners are inaccessible with current position. It looks like something has jammed the threads of the shaft that runs from front to back of the seat on one side. If I disconnect flexible shaft on the stuck side, the other side moves freely to a point and then of course with the other side not moving, I can only move seat maybe an inch. I'm contemplating breaking down the seat to the point where I can get better access to the issue.

So I'm open to any suggestions including method for dissecting the seat itself.

You guys are welcome to any of the parts off either seat BTW. Just pick up shipping.