|
I've had very good luck cleaning a 915 disc. a good solvent wash, then, while still wet with solvent, put into a bucket with dry portland cement. not the pre-mix with sand but straight cement powder. left it in a couple of weeks, mixing things around once in a while. take out and rinse well with water. came out without a trace of oil and no trace of slippage using it drag racing with my 3.0. the cement pulls oil out of everything.
ps. also works great on oil stains on concrete and ashpalt. will suck very old oil stains out of concrete.
Last edited by haycait911; 03-02-2012 at 10:48 PM..
|