|
Registered
Join Date: Apr 2010
Location: New Orleans, LA
Posts: 1,493
|
the sender wiring connects under the panel in the rear floor. see if those wires are connected. the speedometer can be tested by unplugging and rapidly touching the 2 wires from the speedometer together. that should make the speedo needle move. the sender attaches to a recess on the trans on the passenger side and is held on with a small bolt. correctly installed a rough surface faces out. if a smooth plastic surface faces out is it installed wrong.
__________________
1982 911SC, Mocal oil cooler, Bilsteins, Carrera tensioners, backdated heat, factory short shift, Seine gate shift, turbo tie rods, pop off.
2005 Mercedes-Benz C230 kompressor sport 6-speed (daily driver)
|