Cleaning the attic of remnants of the SC EFI and subsequent turbo conversion and now upgrade to 3.4L. All prices are plus shipping from 83706 and will consider breaking up the sets after a while if no one wants it all.
'83 SC CIS disassembled parts including airbox with pop-off, MAF/fuel distributor, metal fuel lines, WUR, AAR, vacuum limiter, cold start valve.
SOLD
Complete GSF (
Blank) EFI fuel delivery conversion set only mounted once and never used, includes AN-10 anodized rails, adjustable fuel pressure regulator, fuel lines including AN-6 return lines for both Carrera 3.2L and 930, AN-10 in-line fuel pressure gauge, adapters, and mounting hardware. This set is a direct fit to the 3.2L intake but would not fit in my SC with AC. It is also supposed to fit a 930 with AC (? 3.2L intake) but if used with a 930 intake will need EFI injector blocks and possibly different mounting hardware
SOLD
3.0L crank std/std clean magnaflux includes double AC pulley
SOLD
3.0L rods set of 6 came off of the above crank $100
3.2L rods set of 6 $100
3.0L oil pump with sump screen, plate, drain plug, and drive shaft
SOLD
98mm JE pistons 10.5:1 set of 6 with pins and clips but no rings 22mm wrist pin for 70.4mm SC crank.
SOLD
965 cylinder head sealing rings set of 6 NIB $25
930 turbo aftermarket header style oil drip tank with AN-8 outlet, NIB $40
ER polybronze rear bushing set, NIB
SOLD
Clewett complete cam sensor kit for sequential EFI conversion
SOLD
930 stock intercooler $100
Dump pipe from waste gate, short;
SOLD
930 up-pipe modified, top slip fits 930 intercooler, bottom new welded section with 2.5" ID $25
930/Sportomatic stock oil tank with sender $200
915 open diff $100
SC rear torsion bars 24.1mm in good condition $50
930 turbo J-pipe
SOLD
SC heater blower working normally
SOLD
Tilton pump used for turbo scavenge with AN-8 male fittings, cracked rear fan shroud but works normally
SOLD
RB Racing electric turbo scavenge pump bronze gear type NIB
SOLD
Turbo scavenge pump shut down timer from RB racing, NIB
SOLD
SC engine air shroud $40
GSF 930 header heat exchangers; cylinder #5 sealing ring is not aligned correctly so required stacking 2 gaskets to seal. Set includes replacement ring, engine to thermostat cross over pipe, turbo oil drip tank.
SOLD
Complete SC exhaust; headers, cross over pipe, catalytic converter, Bishoff muffler, oil pipes. Right side heat exchanger has been scraped and the stud access tube is loose, muffler appears to have a slight leak at one of the rivets.
Recycled