[c2fever]

I have an 01 996 cab. The rear trim that covers the pop-up roll bars that runs the full width of the car, directly above and behind the rear seat backs, is loose on the drivers side. I need to remove it to inspect/repair/replace.

I have attempted to remove the rear panel behind the rear seat backs - easier said than done. This panel is held in place with 2 screws (easy) AND the front edge of the pop up cover (bummer). It seems that I may need to remove the rear seat backs in order to remove the panel. I don't really want to go removing too much interior if it is not required.

Any one had experience in removing the pop-up cover or rear panel?

Thx