RANDOM ENGINE BITS
Now that the valve covers were complete, it was time to finish up that other bits to finalize the engine before putting it in.
I installed new gaskets for injection system. Those six gaskets went in easy enough. I also noticed the warm up regulator wire was in bad shape where it connected to the adaptor.
A quick search on the internet for "Fuel Injector Repair Kit; Terminal Repair Kit For 2 Prong Bosch Injector Type Plug” and I was good to go. You can read more details here
http://forums.pelicanparts.com/porsche-911-technical-forum/661427-ignition-plug-broken-wires-help-w-pic.html
ACCELERATOR CONSOLE
This little guy didn’t look that great but I was willing to live with that. The one problem was the throttle moved only with a decent amount of force.
I took it apart. All the parts were in good shape. It had a nylon washer on each side that was gunked up. Some GUNK, elbow grease and a little sanding and this puppy was in great shape. I also fixed the support bracket and repainted it. It now moves very freely.
http://forums.pelicanparts.com/porsche-911-technical-forum/660616-accelerator-console-engine-movement.html
