Ok so last month I posted the photos of the S1000RR mirrors that I purchased and then disassembled to see what it would take to change the mirror base to match the existing hole pattern of the HP2 Sport fairing. It has taken a lot of time between other projects, but I was able to get the design drawn and ready for the 1st test piece hopefully in the next week or so. The bracket will be hidden under the rubber covering and probably can use the stock bolts. I am thinking that it will be better to use nuts on the inside and a small black backing piece due to the increased leverage of the longer mirror. Will post a pic of the test piece after it is grown on the mill.
