Bob,
You can leave my brackets on the car and just Option1-remove the bar pins OR Option2-unbolt bar pin holder, in this option you have to replace the locknuts every time to make sure they are holding the bolts (upper white nut on the bottom pic), this way bracket almost invisible.
Speaking of installing under the front bushing holders - that is a Piece of Cake... and 10 min deal.
One thing, Alignment needs to be done after the install under the bush holders, that will move the caster a bit. Although, if those brackets installed on top of the bushing holders, then I think alignment will be okay( I am working on this option, a small spacer needed).
My 2c
-Y.
Quote:
Originally Posted by 911 tweaks
Youri...you are peaking some interest I would guess on this...if < $45 shipped you may have interest...
Maybe give some thought to brackets that bolt up to the a-arm brackets & stay attached to the car & have a clever quick dis connect to the hitch device...then you will be cookin' with gas... :-)
To me, it appears a bit of a pain having to unbolt a-arm bracket, bolt up your brackets......when done, un bolt the brackets & re bolt the a-arm brackets...any easier way by chance...??
Thx for sharing your ideas...nice so far... :-)
Bob
|