[Spenny_b]

Hi Chris,

Don't know if it's of any help, but I removed three of plugs from the RH case half a few weeks ago, the ca.23mm high pressure feed bungs (front and rear) plus the ca.13mm bung that's very near the cooling fan hsg dowel.

On the high pressure gallery, used a slide hammer to remove the pulley end, then a length of rod down the gallery to remove the opposite end from behind. I did look at and consider the other plugs, but at the time thought the galleries they were bunging looked accessible without removal.

Also removed the front and rear bungs from each of the cam carriers, to extract the cam spray bars.

Posted some pics on my build thread...page 3 iirc.

HTH,
S