While the car is still at the body shop, I work on parts. Because I have a lot of selfmade aluminum parts like bushes, spacers and brackets, I decided to anodized them myself. I found a while ago some information and a good source for material and forum.
Here are parts before, whithin anodizing process and after. There are more steps than shown here, but it's mainly:
Cleaning (with removing old coat if there is one)
anodizing
colouring
hardening
Here are the parts before any work, just raw aluminum:
Besides some cans with acid etc. and a steamer this is the main equipment:
Anodizing in progress:
Here is the final result:
