Relax, Kurt. We're here. I'll pray for you until about 12:00 PST, then be available for questions. BTW, I think I used a stiff wire to tie the chain tight somehow. A dowel of the prefect length would probably work also. I used a sharp-nosed 'vise grip' type plier to ensure against dropping any rails. The rails "snap" onto the spuds that are bolted in. A string through the rail holes woudl also help keep them out of the case, or a rag in the case. Be gentle as you make the hydraulic connections. Fingers work best to ensure against cross-threading and don't put them on too tight. If they leak, you can snug them up a little more. The passenger-side hose can leak, particularly at the left (inside) end if not mated properly. Good luck, Kurt.
------------------
'83 SC
|