|
What is the secret to:
- Drilling perfectly round holes of diameter up to 1/2". covered
- Chamfering the edges of those holes, with a sharp bevel shape. use a single flute counter sink
- Cutting through slots with parallel sides and semi-round ends. milling machine or
drill the ends then saw and carefully file to make the slot
- Cutting half-blind slots (i.e. recesses) with polished sides and bottoms. milling machine
__________________
"The primary contribution of government to this world is to elicit, entrench, enable, and finally to codify the most destructive aspects of the human personality."
Jeffrey Tucker
|