|
Registered
Join Date: Aug 2005
Location: Fort Payne, AL, USA
Posts: 7
|
This morning I went out to the car and put in some more coolant, as it had gone down some overnight. The rear is still on jackstands at this point. I then started the car and after a minute or two revved it to 2000 rpm. After another minute or two the "indicator failure" light came on with the coolant symbol. I shut it off and waited a few minutes, then lowered the car, started it again, and the indicator is still illuminated. Can I reset this light with my DuraMetric? Could the sensor have possibly been in an area void of coolant for long enough to set it off?
__________________
BMW Bill
|