Quote:
Originally Posted by bar10dah
Too early to tell. You pulled the battery, so you cleared that code. In order to get that code, your DME has to test for it during one of it's cycles. Sorry Randy!
Bentley 24-25, page 177, Drive cycle:
Start engine, idle cold for approx. 2 min, 10 secs. Evaluated: Secondary air system, Evap Leak detection.
Decelerate and come to a stop. Idle in gear for approximately 5 minutes. Evaluated: Evap Leak detection.
The other two cycles are at speed, 20-30 MPH and 40-60 MPH, but they test other components.
|
Oh great. Shatter my hopes. LOL Thanks for the input... When and if it starts or can get it started this week. I'll run it through it's paces.
I still don't think that what those codes show would shut it down completely. But that is logic and these things are anything but logical!!!!!!
Randy