|
Nope, they are designed to fit several diameters. It will not be too problematic, but if you can get the slop out it will only improve things.
For slop between the bushing and the bushing bore I insert zip ties around the bushing with it in place to take up the space. For slop between the bushing and the rod, you are kinda at a loss. The only other thing to do is to make a bronze bushing and JB weld it in there. This needs to have the ID cut to fit your particular rod.
__________________
AKA: Dr Evil on the 914World forum, need your tranny rebuilt, or want a "How to rebuild your transmission DVD" set? PM me.
-74 914 with 74 2.7 CIS
-74 VW Bus with modified 3.1 corvair engine and 3.0 CIS fuel injection system.
-74 BMW R90
|