[JV44HeinzBar]

Originally Posted by 67flat4

not sure on the post above? Did you check for power to the ignition or starter? I would first clean the contacts at the starter. reconnect. if not fixed, pull the small wire off the starter grab a buddy to turn the key and see if there is power at the wire with the ignition switch in the start position.

Hi,
I disconnected the wire leading to the starter/solenoid and hooked the testing light up to the wire. I turned the key to the start postion and the light illuminated. So, there was juice going through the starter/solenoid. Question is, was there enough juice to illuminate the light but not enough to start the car?

Sincerely,
Brent