|
tech: ac compressor bracket stud
Guys, I have an '82 SC. There are 2 studs that are in the cam tower pointing up (by the right side of the fan shroud). One of the ac compressor brackets is secured to these studs with nuts. One of the studs is sheared off flush. If I drill this out, am I at risk of metal shavings getting into the area behind the valve cover? Does this stud go all the way through into the internals of the engine? I've pretty much butchered this up already trying to get this stud to turn.
please advise, any advice/methods welcome.
Bill
|