|
Registered
Join Date: Mar 2004
Location: Leesburg, Georgia, USA
Posts: 1,701
|
On my 964, I took it out and bench tested it. Here are the resistance values of the VDO OP sensor. It is not a good idea to run the engine just to test for resistance. Who knows, you may have zero oil pressure.
0 bar - 9.5 ohms
5 bars - 168.9 ohms.
I used compressed air, mechanical pressure gauge and adapter fitting to pressurize the VDO oil pressure sensor.
__________________
1993 964 C2 still makes me smile
Retired and work as needed as a pain in the **s.
|