I made some kick panel mockups, to mount the Megasquirt computer and related fuses and relays underneath the back seat and completely out of view. The car will use the original fuse box for all the lights/horn/etc, but it will have all new style fuses for the fuel injection computer and related components. When I get to the point where I am doing the interior, the panels will be covered in the same fabric as the rest. But for now, I am just going to make sure that all the comopnents fit.
[/QUOTE]
Gas tank sump:
I'll get a picture of it installed tomorrow.
And the coolant line routing is done:
View from the back (the floorjack is there to hold the dual rear sway bars up, so that I could check clearances.)
View of the front:
Close up of the lower radiator hose, going through the front beam:
I can't wait to take this all apart someday and paint it all nice. It gets old staring at all this rusty bent metal. haha
Up next... finished engine pictures!