I needed to replace my green wire since it was really brittle and the shielding was exposed at the bend coming out of the dizzy (really common). So, I picked up a new green wire from our host.
Pelican Parts - Product Information: 930-602-907-01-M14
Once I had that, I used the long green and purple wire from the MSD kit and cut off a hunk of it from the end with the proper connector. I twisted the wire and put some good shrink tubing over it to hold it together. I then put on a Bosch end similar to the one that Aaron shows in his post. Looks like this when you are all done.
