[jm993rs]

thank you guys !!!!

For the rear whells I have prepared :

The oem hubs with worked to 5 screws, the oem brake disk thins with the work of the 5 holes and with a pair of oem 914-4 front calipers and I not need standard hand brake because I mount one racing hydraulic hand brake.

And for the front I have :

One new pair of drilled 911 brake disk, one pair of 911 sc front calipers, and the oem 911 hubs with the five screws, and I would mount because I thinking have all parts.

Yes !!! Is not the best combination but, when the car are finished, and the engine start Ok, and all of prts works step by step make more modifications, for me the problem is the money,and need go step by step.

Time for mount and dismount for me is not a problem, because I make all with my hands,

I would mount 4 bilsteins front and rear ¡, because I have time, first for me is more important the combination of the money for the car can work !!!


then, to mount the hubs of 911 with the 5 screws, I need the struts of 911?

the struts oem of the 914-4 are little ???