Quote:
Originally Posted by 911Gil
Thanks guys, based on the dimensions and simplicity of the design, it looks like water jet is the way to go. Any recommendations in SoCal? Once again thanks to all of you!!
Gil
|
Your wheel halves locate (precisely) on your current wheel center, they are not centered by the bolts. With a machined 1/2" thick spacer there will be nothing to accurately center the wheel half and with a water jet piece the tolerances are much greater. I would want the spacer to be "hubcentric" to the original locating diameter which would require machining on both faces of the spacer, for trueness and strength.