[metr0p0lis1927]

So I check my fuel pressure at the pump and I'm showing a minimum 100 psi (actually beyond what my gauge will read ) but at the rail I'm showing about 10 psi dropping to 0 as I attempt to accelerate . I'm getting the same readings everywhere I check on top of the engine not just the check port, I've already replaced the damper and the fuel filter is also clear and I know I should be showing 36 or so psi at the rail, the regulators appear to be good and I know I have good vacuum on the damper and both regulators but this appears to explain why my car ( a MY 1984 ) appeared to be starving for fuel (turn out she was telling the truth but who knew ) any suggestions would be appreciated!