|
Well the saga of the FSAE car's electrics goes on. I tried the approach the CPE recommended of opening up the box and fiddling with the wires going into the board with the LED to make sure they were not touching. I even tried to clean up the solder joints (but the un-soldering tool they had was not that great at melting the solder and there were no normal ones). But no luck in fixing it.
To open the box I had to take the seat out, belts off, tie-down straps off, and relocate a ground wire so that was why I did not try it sooner.
__________________
1971 911S, 2.7RS spec MFI engine, suspension mods, lightened
Suspension by Rebel Racing, Serviced by TLG Auto, Brakes by PMB Performance
|