[john 928]

i have the same problem but i set up the timing like 3 timing to make sure. I know that you have to turn the crank pulley to zero then look on the cam gears. there are small notches on the back of the gear. line up the notch with the marks in the pic that bioseshark posted. that pic is the one on the passenger side. the drivers side looks like a end of a triangle. If it doesnt line up you have to losen the tensioner and take the belt off then put the belt on then tighten the tensioner and check that the marks are right on because when you tighten the tensioner the marks will move when you tighten the belt.