|
Do not run air through PVC! It will explode in small shards at high velocity.
If you're going to be hooking that system up "permanently", it would be nice to have all elect/air lines with quick disconnects, in case you need to drag it to the street for service.
I bought a 50ft 10gauge extension cord for that purpose.
For painting, that compressor will be running constantly trying to keep that little tank filled.
Do not underestimate this.
A lot of moisture will be produced from that hot compressor cycling all the time.
Add an overhead leg, across, and then down to a low drain spigot.
Some people have even added coils running through a bucket of cold water to help the in-line moisture condense.
Take the supply air off of the middle of that, and add several inline filters/water traps.
|