View Single Post
si Banker si Banker is offline
Registered
 
si Banker's Avatar
Parting out 1987 911

I will be parting out my 1987 911 coupe. Please let me know what parts yoou would be interested . Car has front end damage, I hit a donkey. I believe the suspension to be Ok. Doors are not damaged; will have more info on the tub and suspension Tuesday

The engine was built by Mayo Performance in Euless, Texas at approx 60K due to needing top end. At that time the rod end bolts, case studs, rings were replaced. New stiffer valve springs, 964 cams and a new cluth were installed. The car has approx 86k . Car uses less that a quart of oil every 3500 miles when oil changes are done. I save the filter element from each oil change, motor is perfect

The trans has LSD

Car has Paul Smart Sway bars front and rear, drilled rotors.

Exhaust is SSIs with matching stainless custom muffler

Steve Wong chip

Car has custom oil cooling system with three oil coolers, temp runs at 180 degrees on a 105 degree day

Ac system up graded at cost of $2500. 38 degree vent temp, int stalled new fan motor last Friday, $650

Cat is Casis with burgandy interior

New 245-45-16 rear tires two wks ago on 8 inch rims
Let me know what parts you are interested in
__________________
1987 911 Coupe
Triumph Trident Track Master


History is the lie we all agree to..........
Old 09-02-2012, 05:47 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)