[wachuko]

When I dropped off the car with Alejandro, body shop guy, (more like an artist with metal and fiberglass work...) he noticed that a couple of parts were missing. This is where the Project List from Pelican works wonders. I can store everything I need in there and then move to the cart when ready to buy it. Anyway, ordered the following from Pelican:

1. Molding on the bottom of the rear quarter window... missing from the car:

911-543-195-02-70K-OEM - Rear Quarter Window Lower Molding (Left) 911 Coupe (1974-89) Black Only Brand: Genuine Porsche

911-543-196-02-70K-OEM - Rear Quarter Window Lower Molding (Right) 911 Coupe (1974-89) Black Only Brand: Genuine Porsche

000-043-129-00-OEM - Ribbon (for the above molding), 5 meters 911 Coupe (1974-89), Brand: Genuine PORSCHE

900-144-009-00-OEM- Tapping Screw (B 2.9 X 13, 2 required), 911 (1974-89)

2. Need to order a couple of brake lines just as a safety precaution:
911-355-618-01-OEM - Front
911-355-617-03-OEM - Front
911-355-627-04-OEM - Rear
911-355-653-05-OEM - Rear
914-355-667-00-OEM - Three way line "T"

3. The Door Striker Plate, Left, and Right need to be replace, unless they sell rebuild kits. The inner plastic pieces are broken, or breaking apart depending on what side you look at
993-531-029-00-M737
993-531-030-00-M737

4. Car has a new set of amber turn signal lenses... but I love the looks of the clear ones: European Front Turn Signal Lens, White, fits left or right (1974-89)

5. Back-Up (Reverse) Light Switch on transmission with Rubber Boot Cap (for back-up light switch)

6. Need two H4 Replacement Lens, as the ones in the car are very pitted... 911-631-927-00-M14

7. CV Joints plates were missing... not sure if these are really needed. But might want to install them anyway... - 911-332-191-00-M100 - 12 needed

8. We used the new steering wheel on the RSR, so I need to order another Momo Prototipo Steering Wheel - Silver

9. If I decide to stick with the stock brake setup then I need four brake rotors. But also looking at TRE Boxster caliper conversion kit.

10. Chrome Side Mirror, 911 (1974-76). From TRE Motorsports

11. Current sport seats are going into the RSR project. So I need a new set of seats for this project. I would like to get the Sport S seat from GTS or the TRE Motorsports Classics Seats. Either one in leather and with headrests.

12. Headers and exhaust system from Brian Bodart.

I will continue to add to this list as I continue to work in the car.