I have been working on a lower price for the seat hinge/recliner. Upper and lower for both seats. Water jetted to a fine edge.
A stainless steel thru bolt you shape like you want. Washers and nuts. 2 or 3 hole upper. $375.00. If I do the polishing. $450.00
You supply the 3/8 inch pins by 3/4 inch long of your choice. Here is my source.
http://www.mcmaster.com/#standard-quick-release-pins/=jnz5v3
Use the hardware off your seats. Here is a source for new hardware.
911 / 356 Porsche Parts | Porsche, Wurth and Fuchs Wheels | Sierra Madre Collection
Here are a few pictures. The pictures are of lazered not water jetted pieces.
One is of the Scotch pads I used for 10 minutes to smooth part of a upper.
One is of that upper.
One is of 8 pieces to do your car, minus the seat angle pins. You supply the pins and hardware.
I will set up a area on my website to show your finished pieces.
Chris Pomares
cpomares@wwdb.org
These are patient pending.
*Pompolo Design Works - Home page
I need 25 sets to do a run. I need only 8 more.
Attached Images
