|
The only "exposed" Romex is in the second picture, above the ball valve, right corner. And that's just something I was pulling through from the other side of the wall that will be removed. The white wire along the conduit in that same picture is a t-stat wire.
Romex as shown in pic 1 can be run all over the place along ceiling joists, through unfinished walls in unfinished basements, etc. when secured properly. There is no difference in what I have there vs. it being run through a stud wall in an unfinished basement, or along a floor joist in a crawl space...so I'm not following all the "exposed" comments...what am I missing?
I suspect what the inspector was referring to was the lack of the wiring being secured within 6" of the box as a few of you have suggested, hence the need for board mounting.
__________________
'84 Carrera Coupe
|