[abisel]

Yep, we are getting the pinchweld into the correct groove in the seal. The 964 seal only has two. One for the glass and the other for the pinchweld.

The more we look at it, the more we think the roof is pushed down a little, but you can't see it. I still think the pinchweld along the A-pillar is keeping the glass from sitting properly. We will pull the glass again and sit it in place without the rubber. I believe there should be about 5mm or 7mm clearance all around between the edge of the glass and the body.

Sure wish I had a the steel windshield template special tool P852 (or such).