|
CTR
Hey gang,
I had a few more questions which I needed answering, so I gave a call myself to the folks that Souk is voting for. Anyway, with regard to the priming/painting issue, I was told they use a 2 component acrylic urethane primer with flex additive which is good stuff and no paint folks should have a problem painting over it. Most importantly, he told me that he would have no problem using different primers for different people if that is what they wanted, ie. if you want to use PPG paint he will use a PPG primer. Additionaly, in terms of the curing issue, he said if you use a good resin you should have less problems associated with the curing issue. He did say that we should mount the parts and then put a heat lamp on it for a day or so, or set it out in some warm sunshine to help with that issue.
In case you haven't guessed, I think my mind is made up. This supplier said he would go out of his way to make sure this group was taken care of and the parts were of excellent finish and quality. I asked about a few other issues, so if you have more questions, post them, somebody may know the answer without bombarding the vendor with phone calls and questions like I did.
Brian
|