|
Registered
Join Date: Dec 2002
Location: Dahlonega , Georgia
Posts: 14,986
|
Get a piece of rubber hose that has the same ID ans the cooler pipes OD. Slit the hose length wise so you can slip it over the cooler pipe. Clean the area well and put a thin coat of JB. Slip the hose over the wet goop and clamp in place. Will hold up fine until you replace with Carrera cooler. When you remove the old cooler remove the rubber patch and sand the JB down/off. Have it fixed by brazing and sell to a new owner to be used for many years to come. Just disclose you had it patched. Good luck.
__________________
2002 Boxster S . Arctic silver + black top/int. Jake Raby 3.6 SS engine " the beast ". GT3 front bumper, GT3 side skirts and GT3 TEK rear diffuser. 1999 996 C4 coupe black/grey with FSI 3.8 engine . Rear diffuser , front spoiler lip with ducktail spoiler .
|