Quote:
Originally Posted by DZGunner
Where did you get the hose made, i currently have a hose with a hole in it and would really like a solid piece.
It also i think is the one that goes from the radiator to the trans.
|
The front hose can be replaced by using a dremel and cutting off the sleaves that crimp the hose on the barbs.
I used a transmission line kit from Autozone (Metric 10mm) and Fuel Injection clamps. THe front section does not need the heat resistance the mid and rear sections need, and this has worked well for me.
If you are on Rennlist look in my Galery (or register on rennlist and look at my gallery album (dcrasta)) Took me 1 hour to do. I had the use of a lift however you can jack the front of the car up to do this.
You will need to top off the fluid once you are done .