Hello,
I just replaced the automatic transmission on this 2002 Boxster. The battery was disconnected for a while. Now, when i start the engine, it does not accelerate at all. I'm getting 100% TPS value on the scan tool constantly. The TPS connector is on properly. I believe there is an adaptation procedure.(Turn key on for 1 min. then off for at least 10 secs.) - Already tried that. Also, the transmission position indicator lights on the dashboard are alternatively flashing between P and 4. The transmission does move the wheels in forward and reverse.
Note: The vehicle is hoisted with all 4 wheels off the ground and the rear half of the convertible top is open.
Your help would be greatly appreciated.
