Quote:
Originally Posted by SeanPizzle
I have welded up several XJ unibody rails where the steering box tears the metal. Same for the panhard "frame" mounts. At minimum, I would plate the whole drivers side frame horn and tie it to the pass side with a brace from the panhard mount to the pass frame horn. I would also beef up the lower rad support.
Everybody is a SME on something. Building XJ's falls into my wheelhouse with 15 years of experience.
|
So you've seen this damage to XJs from plowing snow?
Or have you seen damage from the stresses of off-roading and rock crawling?
Having plowed snow for over 20 years I can tell you that if you're damaging the truck like that
you're doing it wrong
Residential plowing isn't that tough on the rig if you know what you're doing