[DRACO A5OG]

Check the dizzy, I did not see it on your refresh list.

Remove the cap and check the rotor for abnormal wear.

Also remove the rotor ans see it there is any slop, axial and this case up and down play.

While running if rotor is bouncing up and down it will miss fire due to lack of spark.

In my case all the shims disintegrated coupled with the inner snap in bearing worn out. To be sure note the position of the dizzy or turn engine to TDC then removed dizzy to check for slop, the dizzy must have some resistance, if it spins freely it is time to add shims if you are lucky, if inner snap in bearings, it is toast.

To avoid this inthe future drop several drops of motor oil underneath the felt cover of the rotor receiver.

Jim